All Categories

  • All Categories
  • Audio Products
  • Motion Activated Audio Players
  • Triggered MP3 Players and Speakers
  • MP3 Modules and Sound Boards
  • Voice Recording Modules
  • Voice Modules
  • Bluetooth Audio Decoder Modules
  • Power Amplifiers
  • Bluetooth Speakers
  • Voice Chips
  • Sensors
  • PIR Sensors
  • Ultrasonic Sensors
  • Microwave Sensors
  • Alarms & Speakers
  • Car Alarms
  • Gas Detector Alarms

PIR Motion Sensor Activated Audio Player Module (Voice Recorder Based)

  • $16.99

Features1. Built in a high quality audio recorder, and supports microphone recording mode and line-in recording mode.2. Uses PIR motion sensor to trigger audio playback, and the detection range can be up to 4 meters.3. Equipped with a flash memory that can store max. 120 seconds ...

Features
1. Built in a high quality audio recorder, and supports microphone recording mode and line-in recording mode.
2. Uses PIR motion sensor to trigger audio playback, and the detection range can be up to 4 meters.
3. Equipped with a flash memory that can store max. 120 seconds recording in microphone mode and max. 60 seconds in line-in mode. 
4. Make recording through pushing the recording key, and it’s easy to operate.
5. The earlier recording will be covered with the new recording, and only one recording exists.
6. Uses the sliding switch to switch the recording modes. 
7. Adjustable volume with the volume wheel. 
8. Great performance and low power consumption.
9. DC 3.7-5V power input (3xAA or 3xAAA batteries preferable). Also can be powered through the micro USB port with a phone charger or a 5V 1A power adapater.
10. Main board size: 45mm x 45mm 
      PIR board size:20mm x 18mm
 
Applications
Audio advertising player for supermarkets or shops, talking sign for POP displays and point of sales, smart doorbell, door greeter, automatic explanation machine, audio memo reminder, security alarm and so on.
 
Technical Parameters
parameter
 
Operation Guide
 
illustration
1. Power on the module(be noted that the module itself has no power switch), and wait about 10-15 seconds initialization. 
2. Choose the recording mode you need using the sliding switch(the upper end is for line-in recording while the low end is for microphone recording). 
3. When you choose line-in recording, please follow the steps below.
1). Before line-in recording, you need to connect it to your cell phone or computer via a two-end 3.5mm audio cable.
2). Prepare the audio message on your cell phone or computer. Open the music app and target the audio message you 
   are going to record into the device.
3). Short press the recording key and you will hear a “beep” that means the recording gets started, then play the audio 
   message targeted on the app. 
4). When the audio message goes to the end or you stop it, short press the recording key on the device and now you 
   will hear the “beep” for two times that means the recording is done. 
5). When the PIR sensor gets detected, the module will play back the recording. And every time you power it on the 
   module, it will always play back this recording if you don’t record a new one.
Note: Please adjust the sound volume as loud as possible on the app to ensure the recording on the device will have a loud sound volume. 
4. When you choose microphone recording, please follow the steps below.
1). Short press the recording key and you will hear a “beep”, get as close as possible to the microphone and speak to it.
2). When your speaking is finished, short press the recording key again and you will hear the “beep” for two times. The 
   recording is done.
3). When the PIR sensor gets detected, the module will play back the recording. And every time you power it on the 
   module, it will always play back this recording if you don’t record a new one.
Note: No matter which recording mode you choose, the new recording will always cover the earlier recording. 
 
Packing Details
1. FN-AP01 Module x 1 piece
2. Speaker x 1 piece
 
Battery holder not included. 

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Tags: PIR Motion Sensor Activated Audio Player Module (Voice Recorder Based)